mail box

Our Learning Center

Infinity Roofing Contractor's Tips for Preventing Shingle Curling and Buckling in Kennesaw

Infinity Roofing Contractor's Tips for Preventing Shingle Curling and Buckling in Kennesaw

July 09, 202411 min read

Just as any good homeowner, you want your roof to look great and protect your home for years to come. One of the most common issues we see with shingle roofing is curling and buckling. At Infinity Roofing Contractors, we're committed to helping you maintain a beautiful, durable roof. In this comprehensive guide, we'll share our expert tips on preventing shingle curling and buckling, ensuring your roof stays in top shape for as long as possible.


Understanding Shingle Curling and Buckling

Before we dive into prevention, let's first understand what shingle curling and buckling are and why they occur.

Shingle curling is when the edges of your shingles start to lift or curl upwards. This can happen at the corners or along the entire edge of the shingle. Buckling, on the other hand, occurs when shingles form a wave-like pattern or bulge on your roof.

Both of these issues can compromise the integrity of your shingle roofing system, leading to leaks, reduced energy efficiency, and a shortened lifespan for your roof. They can also detract from your home's curb appeal, making your roof look old and worn before its time.


Common Causes of Shingle Curling and Buckling

1. Poor Ventilation: Inadequate attic ventilation can trap heat and moisture, causing shingles to deteriorate faster.

2. Improper Installation: If shingles aren't nailed correctly or the underlayment isn't installed properly, it can lead to curling and buckling.

3. Age: As asphalt shingles age, they naturally become more prone to curling and buckling.

4. Low-Quality Materials: Cheaper, lower-quality shingles are more susceptible to these issues.

5. Extreme Weather: Kennesaw's hot summers and occasional severe storms can take a toll on your roof.

6. Multiple Layers of Shingles: Adding new shingles over old ones can lead to uneven surfaces and buckling.

Now that we understand the causes, let's explore Infinity Roofing Contractor's top tips for preventing these issues and maintaining a healthy shingle roofing system.

1. Ensure Proper Attic Ventilation

One of the most crucial factors in preventing shingle curling and buckling is proper attic ventilation. Good ventilation helps regulate temperature and moisture levels in your attic, which directly impacts the health of your roof.

At Infinity Roofing Contractors, we recommend a balanced ventilation system that includes both intake and exhaust vents. Intake vents, typically installed in the soffit or eaves, allow cool air to enter the attic. Exhaust vents, located near the roof peak, allow hot air and moisture to escape.

For most homes, we suggest a combination of ridge vents and soffit vents. This setup creates a natural airflow that helps keep your attic cool and dry. The exact number and type of vents needed will depend on your roof's size and shape, as well as local building codes.

Proper roof ventilation not only helps prevent shingle curling and buckling but also offers other benefits:

- Reduced energy costs by keeping your attic cooler in summer

- Prevention of ice dams in winter

- Extended lifespan of your roofing materials

- Reduced risk of mold and mildew growth in your attic

If you're unsure about your current ventilation system, our experts at Infinity Roofing Contractors can perform an assessment and recommend improvements if needed.


2. Choose High-Quality Shingles

When it comes to shingle roofing, quality matters. Higher-quality shingles are more resistant to curling, buckling, and other forms of damage. They may cost more upfront, but they can save you money in the long run by lasting longer and requiring fewer repairs.

At Infinity Roofing Contractors, we often recommend architectural shingles for our Kennesaw clients. These shingles, also known as dimensional or laminated shingles, offer several advantages over traditional 3-tab shingles:

- Greater durability and longer lifespan

- Better resistance to wind and impact damage

- Enhanced curb appeal with a more dimensional look

- Improved warranty coverage

When selecting shingles, look for products from reputable manufacturers that offer strong warranties. Also, consider shingles designed for your specific climate. In Kennesaw's hot and humid environment, algae-resistant shingles can be a wise choice.


3. Ensure Professional Installation

Even the highest quality shingles can fail if they're not installed correctly. That's why it's crucial to choose an experienced, reputable roofing contractor for your shingle roofing project.

At Infinity Roofing Contractors, our team is trained in the latest installation techniques and follows manufacturer guidelines to the letter. Here are some key aspects of proper shingle installation:

- Correct nail placement and quantity

- Proper underlayment installation

- Adequate flashing around chimneys, vents, and other roof penetrations

- Correct starter strip installation

- Proper alignment and overlap of shingles

We also ensure that your roof deck is in good condition before installing new shingles. A solid, smooth surface is essential for preventing future issues like buckling.

4. Address Existing Ventilation Issues

If you're re-roofing an existing home, it's an excellent opportunity to address any ventilation issues. Our team at Infinity Roofing Contractors will assess your current ventilation system and make recommendations for improvement.

This might involve adding more vents, upgrading to a ridge vent system, or installing powered attic fans for homes with particularly challenging ventilation needs. We'll work with you to find the most effective and cost-efficient solution for your specific situation.


5. Consider a Cooler Roof

In Kennesaw's warm climate, a cooler roof can help prevent shingle curling and buckling by reducing the overall temperature of your roof. There are several ways to achieve this:

- Choose light-colored shingles that reflect more sunlight

- Opt for shingles with cool roof technology, which are designed to reflect more of the sun's rays

- Consider a radiant barrier in your attic to reflect heat away from your living space

While darker shingles are popular for their aesthetic appeal, lighter colors can significantly reduce the amount of heat absorbed by your roof. This not only helps prevent curling and buckling but can also lower your cooling costs in the summer.


6. Regular Roof Inspections and Maintenance

Prevention is always better than cure when it comes to roof issues. Regular inspections can catch potential problems early, before they lead to significant damage or costly repairs.

At Infinity Roofing Contractors, we recommend having your roof professionally inspected at least once a year, ideally in the spring after winter weather has passed. During these inspections, we look for:

- Signs of shingle damage, including curling, buckling, or missing shingles

- Issues with flashing around chimneys, vents, and skylights

- Clogged gutters or downspouts

- Signs of water damage or leaks in the attic

- Problems with ventilation


In addition to professional inspections, we encourage homeowners to do their own visual checks from the ground after severe weather events. Look for any obvious signs of damage or missing shingles.

Regular maintenance is also crucial. This includes:

- Keeping gutters clean and free of debris

- Trimming overhanging tree branches

- Clearing leaves and other debris from your roof

- Addressing any minor issues promptly before they become major problems


7. Proper Attic Insulation

While ventilation helps move hot air out of your attic, proper insulation helps keep it from getting there in the first place. Adequate attic insulation is crucial for maintaining a consistent temperature in your attic, which in turn helps prevent shingle curling and buckling.

In Kennesaw, we typically recommend an R-value of R-38 to R-60 for attic insulation. This translates to about 10-16 inches of fiberglass batt insulation or 8-12 inches of blown-in cellulose insulation.

Proper insulation offers several benefits:

- Reduced heat transfer from your living space to the attic

- Lower energy bills by reducing the workload on your HVAC system

- More consistent indoor temperatures

- Reduced risk of ice dams in winter

When installing new insulation, it's important not to block soffit vents. Our team at Infinity Roofing Contractors uses baffles to ensure proper airflow from the soffits even with added insulation.


8. Address Moisture Issues

Excess moisture in your attic can lead to a host of problems, including shingle curling and buckling. Common sources of attic moisture include:

- Bathroom and kitchen exhaust fans venting into the attic instead of outside

- Leaky ductwork from HVAC systems

- Roof leaks

- Inadequate vapor barriers


To prevent these issues:

- Ensure all exhaust fans vent directly outside, not into the attic

- Have your HVAC system inspected regularly and fix any leaky ductwork

- Address any roof leaks promptly

- Consider installing a vapor barrier if you don't already have one

Our team can assess your attic for moisture issues and recommend solutions as part of our comprehensive roofing services.


9. Choose the Right Underlayment

The underlayment is a crucial component of your roofing system that often goes overlooked. It provides an extra layer of protection against water infiltration and can help extend the life of your shingles.

At Infinity Roofing Contractors, we typically recommend synthetic underlayments for their superior performance compared to traditional felt paper. Synthetic underlayments offer:

- Better water resistance

- Improved durability and tear resistance

- Lighter weight and easier installation

- Better slip resistance for safer installation

In areas prone to ice dams or for low-slope sections of roof, we may recommend ice and water shield. This self-adhering membrane provides excellent protection against water infiltration in vulnerable areas.


10. Consider Professional Roof Coating

For existing asphalt shingle roofs showing early signs of aging, a professional roof coating can help prevent further deterioration, including curling and buckling. These coatings can:

- Reflect UV rays, reducing heat absorption

- Provide an extra layer of waterproofing

- Extend the life of your existing shingles

While not a permanent solution, roof coatings can be a cost-effective way to extend the life of your roof and delay the need for a full replacement.

11. Proper Fastening Techniques

The way shingles are fastened to your roof can significantly impact their performance and longevity. Improper nailing is a common cause of shingle failure, including curling and buckling.

At Infinity Roofing Contractors, we follow manufacturer guidelines for nail placement and quantity. This typically involves using four to six nails per shingle, depending on your roof's slope and local wind conditions.

We also ensure that nails are driven straight and at the correct depth. Overdriven nails can puncture the shingle, while underdriven nails may not provide adequate holding power.


12. Consider Impact-Resistant Shingles

While not directly related to curling and buckling, impact-resistant shingles can provide superior protection against another common cause of shingle damage: hail and falling debris. These shingles are designed to withstand impacts that might damage standard shingles, potentially reducing the overall stress on your roof.

Impact-resistant shingles often come with enhanced warranties and may even qualify you for discounts on your homeowner's insurance. While they typically cost more upfront, the long-term benefits can make them a worthwhile investment, especially in areas prone to severe weather.


13. Proper Attic Insulation

We've touched on this earlier, but it's worth emphasizing: proper attic insulation is crucial for preventing shingle curling and buckling. In addition to the R-value recommendations mentioned earlier, consider these tips:

- Ensure even distribution of insulation across your attic floor

- Don't compress insulation, as this reduces its effectiveness

- Leave space between insulation and the roof deck to allow for proper ventilation

- Consider adding a radiant barrier for extra protection against heat transfer

Remember, the goal is to keep your attic temperature as close as possible to the outside air temperature. This reduces the heat stress on your shingles and helps prevent curling and buckling.


14. Address Ice Dam Issues

While not as common in Kennesaw as in colder climates, ice dams can still occur during occasional cold snaps. Ice dams form when heat from your attic melts snow on your roof, which then refreezes at the eaves. This can force water under your shingles, leading to damage and potentially contributing to curling and buckling.

To prevent ice dams:

- Ensure proper attic insulation and ventilation

- Use ice and water shield along the eaves

- Consider installing heat cables in problem areas


15. Regular Gutter Maintenance

While it might not seem directly related to your shingles, proper gutter maintenance is crucial for preventing roof damage, including shingle curling and buckling. Clogged gutters can cause water to back up under your shingles, leading to water damage and creating conditions that promote curling and buckling.

We recommend cleaning your gutters at least twice a year, typically in the spring and fall. If you have many trees near your home, you may need to clean them more frequently. Consider installing gutter guards to reduce the frequency of cleanings and improve overall gutter performance.


Preventing shingle curling and buckling is crucial for maintaining a healthy, long-lasting roof. By following these tips from Infinity Roofing Contractors, you can significantly extend the life of your shingle roofing system and protect your Kennesaw home for years to come.

Remember, your roof is a complex system, and all of its components need to work together for optimal performance. From proper ventilation and insulation to high-quality materials and expert installation, every aspect plays a role in preventing issues like curling and buckling.

At Infinity Roofing Contractors, we're committed to providing top-quality roofing services to homeowners in Kennesaw and the surrounding areas. Whether you're in need of a new roof, repairs, or just a professional inspection, our team of experienced professionals is here to help.

Don't wait until you notice problems with your roof. Proactive maintenance and timely repairs are key to preventing costly damage and extending the life of your shingle roofing system. Contact Infinity Roofing Contractors today to schedule your roof inspection or to learn more about our comprehensive roofing services. Let us help you keep your roof in top condition, protecting your home and your investment for years to come.

Back to Blog
3440 Blue Springs Rd, Kennesaw, GA 30144, USA

How can we help you today?

Our family is standing by to help yours.

How can we help you today?

Resources

Contact

3440 Blue Springs Rd. NW

Suite #202

Kennesaw, GA 30144

1720 Mars Hill Rd.

Suite 8-282

Acworth, GA 30101

Facebook 1
Instagram 1
LinkedIn 1
Google 1

Powered By - 99 Creatives

Privacy